12-foot bank stainless steel cages with base, wheels
12-foot bank stainless steel cages
On the top, 4 cages are 30”w by 30”h, and one cage is 24”w x 30” h
The 3 bottom cages are 48”w by 36” h (with a divider, which gives you the option of 2 cages)
All cages are 28” deep
This bank is on a stationary base
Features Of The Stainless Steel Cages
Door:
Smooth deburred stainless steel door spokes to eliminate sharp ends
The electropolished removable ambidextrous door made of stainless steel can be remounted with hinges on the right side
The door extends below the cage floor to secure paper liners in place
Snug fit between the door and cage body to prevent pinching of an animal's paws
.1875-in. (.48cm) diameter stainless steel vertical spokes spaced 1-in. apart and welded at every intersection to cross members and frame
.3125-in. (.79cm) diameter stainless steel door frame and cross members welded together for strength
Latch:
Stainless steel latch that easily disassembles for sanitizing and adjusting
.3125-in. (.79cm) diameter stainless steel latch keeper securely latches the door
Heavy 12-gauge stainless steel latch brackets
Notched latch connector bar for easy opening
Heavy 12-gauge stainless steel self-latching door latch connector designed to accommodate a padlock for greater security
Hinges:
.3125-in. (.79cm) diameter stainless steel hinge pins for easy door removal
Heavy 12-gauge stainless steel die-formed barrel hinges that operate smoothly
Body:
22-gauge Type 304 stainless steel body heli-arc welded into one piece for maximum strength
750 in (1.90cm) coved rear corners on top and bottom to prevent dirt and bacteria accumulation
750 in (1.90cm) radius bends on all sides and back for a smooth and easy-to-clean interior surface
Distinctive floor design with a fluid-retaining front lip included in all Regal Cages
The bottom lip overlaps the lower cage when used in a Regal Cage arrangement
Frame:
18-gauge stainless steel die-formed floor support brace to keep the floor rigid for animal comfort
18-gauge stainless steel die-formed rear support to maintain cage level
18-gauge stainless steel die-formed front frame for added strength and squareness
The frame is fitted with weld nuts to attach cage hardware securely
Hardware:
Stainless steel installation hardware for maximum strength
Vertical molding strips and 14-gauge bolt-on corner plates mount easily
For secure hardware attachment, 250-20 stainless steel truss-head machine screws fasten into the cage's front frame's weld nuts.
DOUBLE WIDE CAGES
- Two smaller doors allow you to have a large cage with less aisle space needed to open doors all the way.
- 14-gauge stainless steel latch: top and bottom plate latches door in two places.
- Stainless steel channel holds Divider Panel in place.
- There’s no center post to get in the way when placing animals in the cage.
- Self-locking door latch secures door at top and bottoms.