3-Kennel Set Stainless Steel with - Raised Floor Pen System
$11,995. Call: 877-545-1202
The kennels are sold in a set of 3 for $11,995.00
34.25 inches wide
35.75 inches deep
78.75 inches tall
The kennel floor sits 5.33 inches off the floor.
The weight limit inside the kennel is 500 pounds
Raised floor kennels are designed to work with individual drains or a trough that spans the length of the kennels. Wash/spray them down and push the waste liquids/solids toward a drain.
The coated floor section .75” expanded metal resting surface with .25” x 1” side rails and a .25 x 1” cross member coated with 110 mil thick orange plastisol
Features:
System with Stainless steel partition
Swing gate stainless steel Raised-Floor/Facility left/right End Panel with floor-support brackets.
Floor seal system available.
Removable plastisol-coated floor sections.
Stainless steel back panel.
Back panels may be ordered with guillotine doors to create a more versatile pen system.
Grill
Grill is fully circumference welded to the tubular frame at all contact points to eliminate shifting, racking, and rattling, and prevent fluids from entering the frame.
Vertical spokes are made of .2375-in. (.603cm) diameter stainless steel.
Stainless steel vertical spokes and cross members are welded together at every intersection.
Crossmembers are made of .312-in. (.792cm) diameter stainless steel.
Hinges
Stainless steel .3125-in. diameter (.79cm) hinge pins remove easily for simple maintenance if necessary.
Durable heavy 12-gauge stainless steel barrel hinges are welded to the swinging gate jamb and frame for smooth operation.
Exclusive Double Swing Gravity Latch Lock
Low profile design with a heavy 12-gauge stainless steel connector secures the gate at two points on 28" centers making it the strongest gate latch available.
The latch connector disassembles easily for cleaning and adjustments, all hardware is stainless steel. (for doors to swing IN/OUT)
Frame
All corners have weld-nut welded to the inside of the tubing to allow you to disassemble and reassemble pens without loss of structural integrity.
Mitered corners and heli-arc welded joints on the gate jamb and frame seal out fluids and debris.
Single or Double Bowl Feed-
Designed with the same high-quality heavy-duty stainless steel features as our swinging gate with stainless steel grill.
Stainless steel feeding bowls slide out and latch in place to simplify feeding the animals in your care.